Neural Link Integration Guide

Overview

Neural Link is Cyberdyne's advanced neural interface platform that enables seamless communication between Cyberdyne devices and the human nervous system. This guide walks you through the basic setup process for home or clinical use.

💡 Tip: If you're setting up Neural Link to work with a third-party device such as the Sirius HappyBot 3.0, please see this integration guide instead.

---

Prerequisites

Before starting, ensure you have the following:

• A Neural Link Core Module (v2.0 or later)

• A Cyberdyne BioSync Adapter

• CyberdyneLink App installed on a compatible device (iOS, Android, or CyberdyneOS)

• Stable Wi-Fi connection or cellular fallback

• An active Cyberdyne ID

---

Step 1: Physical Setup

1. Unbox the Neural Link module and confirm the serial number matches your activation card.

2. Place the BioSync Adapter behind the left ear (or designated neural contact point).

3. Attach the Core Module via the magnetized port — you’ll hear a single tone when it’s aligned correctly.

4. Power on the device using the side button (hold for 3 seconds). The indicator light should turn blue.

---

Step 2: Activate via CyberdyneLink App

1. Open the CyberdyneLink App on your mobile device.

2. Log in with your Cyberdyne ID.

3. Tap “Set Up New Device” and follow the on-screen instructions.

4. The app will automatically scan for your Neural Link and verify your BioSync Adapter status.

5. Once detected, tap “Activate Neural Link”.

---

Step 3: Neural Calibration

1. Follow the in-app prompts to complete Neural Calibration (approx. 2–3 minutes).

2. You’ll be asked to blink, nod, and remain still as the system maps your neural signals.

3. Once complete, a confirmation screen will display:
   ✅ Calibration Successful

---

Step 4: Confirm Connectivity

1. Return to the app dashboard.

2. You should see “Neural Link Connected” at the top with real-time signal indicators.

3. Run a test command like “Pulse Sync” or “Cognitive Ping” to confirm functionality.

---

Troubleshooting Tips

• No signal detected? Try repositioning the BioSync Adapter.

• App won’t detect device? Ensure Bluetooth and Wi-Fi are enabled.

• Link not calibrating? Restart the device and attempt setup again.

Still having trouble? Submit a support request or chat with an agent directly.

---

Next Steps

• Using Neural Link with Cyberdyne Health Suite

• Integrating Neural Link with HappyBot 3.0 (Sirius)

• Neural Link Privacy & Data Handling

---

Need help now? Contact Cyberdyne Support via chat or call 1-800-CYBERDYNE.